JVC VR-N1600E - Manual (Page 118)

110
Applications
Using the Auto Detect Feature
The Auto Detect feature enables automatic detection of network
cameras.
Memo :
● When multicast packets are configured such that they do
not pass through the network equipment, such as a
switching hub, the Auto Detect of the camera may not
function properly.
The [IP Information] list contains information on the IP address
of the automatically detected camera, MAC address, number of
video CH, manufacturer, and model.
1
Click [Auto Detect]
● Auto Detect starts and the camera image appears on
the screen.
2
Replace the detected camera accordingly in
sequence
● You can click the Sort button to sort the order of
detected cameras.
● There are five types of sort buttons, including Sort by
[IP], Sort by [MAC], Sort by [CH], Sort by [MAKER],
and Sort by [MODEL] buttons.
● Select the detected cameras, followed by clicking the
[Up] or [Down] button to change the order of the
cameras.
● Deselect the check box of any camera that you are not
using.
Memo :
● The camera at the top of the list is used with priority.
3
Configure the analog input (VR-N900U)
● For specifying the number of channels and format of
the analog input to be used.
Note :
● If the signals of the analog camera connected to the rear
panel [VIDEO IN1 to 4] terminal are different from those in
the [AnalogInput] settings (NTSC/PAL), a message
indicating
AENCODE ERROR format)B will appear. In
this case, click the [OK] button using the mouse to hide
the
AENCODE ERROR format)B message, followed by
specifying the NTSC/PAL selection for [AnalogInput]
correctly.
● For details on how to use the mouse, refer to [Character
Input and Mouse Pointer] (A Page 24).
4
Click [Entry]
5
Click [OK]
● The [Camera Record Setting] screen appears.
6
Click the [Close] button on the [Camera Record
Setting] screen
● The Default View is automatically created. To save this
view, change its name.
Memo :
● The Default View created by the Auto Detect feature may
change the camera placement in the view. To maintain a
fixed position, name the view and save it.
Note :
● Select ADo not detect in the future.B check box on the
[Detect Device] screen during the Auto Detect operation if
you do not want the [Detect Device] screen of that camera
to appear during subsequent Auto Detect operations. For
cameras that you have excluded from detection, you can
add (A Page 82) them again manually at a later time.
Auto Detect Settings
(continued)
2
1
5
4
3
NR-N900U
VR-N1600_J.book Page 110 Tuesday, June 3, 2008 2:26 PM