JVC VR-N1600E - Manual (Page 102)

94
Applications
Specifying an Output
1
Select the camera for specifying the event from
the [Defined events] list on the [I/O Setup]
screen
2
Click the [Add new output event...] button
● The [Add New Output] screen appears.
3
Specify the output connection destination,
output holding time, and output name
Note :
● The [Add new output event...] button is disabled if there is
no output available for use by the network camera.
[Advanced] Screen
The [Advanced] screen enables you to specify network settings
for handling events.
1
Click the [Advanced...] button on the [I/O Setup]
screen
● The [Advanced] screen appears.
2
Specify the following items.
Camera Input/Output Port
and Events (continued)
Item Description
A External
output
connected to Displays the device name for which
output is specified. (This is a read-only
field. )
B Output
connected on For selecting which destination to
connect the output to.
C Keep output
for For specifying the output holding time
in units of 1/10 seconds or seconds.
D External
output name For specifying a name for the output.
Memo :
● The following characters cannot
be used as part of the event
name.
< > ' " \ / : * ? | [ ]
E Test Output Click this to perform a test on the
output settings.
2
1
A
D
B
C
E
[Add new output] Screen
Item Description
A Ftp Server
Port For specifying the port number to use for
sending event information from the device to
the surveillance system via FTP. (Specify a
number between 1 to 65535. )
B Alert Port For specifying the port number to use for
handling warnings related to events,
including generic events. (Specify a number
between 1 to 65535. )
C SMTP
Port For specifying the port number to use for
sending event information from the device to
the surveillance system via SMTP. (Specify
a number between 1 to 65535. )
[I/O Setup] Screen
Click
A
B
C
D
[Advanced] Screen
VR-N1600_J.book Page 94 Tuesday, June 3, 2008 2:26 PM