JVC VR-N1600E - Manual (Page 105)

97
A General Event settings
Memo :
● This unit receives generic events from the port that is
specified in [Alert Port] on the [Advanced] screen.
(A Page 94)
B Notification settings
C
Event rules string
Memo :
● To specify the timer settings for a generic event, select the
event added in Step
2
, and click the [Add new event...]
button.
Item Description
Event Name For specifying a name for the event. Enter
a unique name for the event.
Memo :
● The following characters cannot be
used as part of the event name.
< > ' " \ / : * ? | [ ]
Event Protocol For selecting the protocol that this unit
uses to receive data when detecting the
event:
Any Receives and analyzes data that uses
either the TCP or UDP protocol.
TCP Receives and analyzes only data that uses
the TCP protocol.
UDP Receives and analyzes only data that uses
the UDP protocol.
Event rule type For specifying the rules when analyzing
the received data.
Match In order for an event to be triggered, the
received data must totally coincide with the
message specified in the [Event message
include] field of the [Event rules string]
section C, and must not contain any other
messages.
Search In order for an event to be triggered, the
received data must contain the message
specified in the [Event message include]
field of the [Event rules string] section C.
Other messages may be included in the
data.
Event priority The same data may be used by different
events. Assigns the order of priority to
each event for determining the event to
trigger when the received data matches
the criteria of multiple events. Set the
priority level to a value between
A0B
(lowest priority) and A1000B (highest
priority).
Item Description
Send e-mail if
this event
occurs Select this check box to send an e-mail
alert when an event occurs.
Include image
from camera Select this check box to attach the
currently recorded images to the e-mail
when the input event is triggered. Select a
camera from the list below the check box.
Item Description
Event substring For specifying the expression to search for
during data analysis by this unit.
Specify at least one expression, and click
the [Add] button. The specified expression
is added to the [Event message include]
field.
If you have added multiple expressions as
one item, the expressions enclosed in the
quotation marks must appear together in
the data in the specified sequence in order
to match the criteria.
Event message
include Displays the string that is used for the
actual data analysis. The field is not
directly editable. However, you can place
the cursor inside the field and click the
following buttons.
Add Adds the information in the [Event
substring] to the [Event message include]
field.
Adds [ ] to the [Event message include]
field.
The parenthesis is used to process the
expressions as a single entity. In other
words, the content inside the parenthesis
is processed first.
Adds [ ] to the [Event message include]
field.
AND Adds the operator AANDB to the [Event
message include] field. Use the AANDB
operator when you want to specify that the
expressions on both sides of
AANDB must
be present.
OR Adds the operator AORB to the [Event
message include] field. Use the OR
operator when you want to specify that
either one of the expressions on the two
sides of OR must be present.
Delete For deleting the item to the left of the
cursor in the [Event message include] field.
VR-N1600_J.book Page 97 Tuesday, June 3, 2008 2:26 PM