JVC VR-N1600E - Manual (Page 68)

60
Basic Operation
Adjusting Camera Settings (continued)
Note :
● Set this unit such that the total distribution frame rate to all
surveillance computers does not exceed 80 ips (VR-
N1600U/E)/30 ips (VR-N900U).
● The recording frame rate may deteriorate if you change
the picture quality. Changing the [Image Quality] settings
may affect the recording performance. As such, use this
function with the value fixed at
AFullB.
● When you drag the timeline browser using the mouse
during playback, the frame rate setting is disabled.
[Searching Recorded Image Using the Timeline Browser]
(A Page 40)
● Notification sound is not output from this unit during
motion detection or occurrence of an event. This function
is for use by the NVR Viewer, which is downloaded onto
the surveillance computer.
4
To adjust the settings on other cameras, repeat
Steps 2 to 3
Memo :
● To adjust the settings of all cameras at once, click the
[Apply To All] button. The new camera settings will be
applied to all cameras in the view.
Using Your Views on Different Computers
User settings, including the [Private] view, are stored on this
unit. In other words, you can use your [Private] views on any
surveillance computer that has this unit and the
ANVR ViewerB
installed (A Page 118) by logging in with your own user name
and password.
1
Double-click the [Setup] tab on the NVR Viewer.
Note :
● User rights may be configured to restrict access to the
[Setup] tab. In this case, consult your system
administrator.
2
Select the folder you want to use in the [Views]
section
● You can create or edit views.
● Folders that cannot be edited are indicated by the
[LOCK] icons.
Adding a Carousel
You can use the carousel feature to display images from multiple
cameras in sequence in a single view position. Also, you can
set the time interval for switching the camera to view.
1
Displaying the [Screen Setup] Screen
Screen Setup (continued)
Item Description
G Sound on
Event Enables notification with a simple alert
sound when events related to the selected
camera occur while viewing images from the
camera on the [Live] screen.
To use this feature, you need to configure
the event notification setting. (A Page 98)
Always off Does not output sound alert when an event
related to the camera occurs.
Always on Outputs a sound alert each time an event
related to the camera occurs.
H Apply To
All Press this button to apply the new settings to
all cameras.
[Carousel]
VR-N1600_J.book Page 60 Tuesday, June 3, 2008 2:26 PM