Juniper Networks J-Series - Manual (Page 80)

Table 35: Configuring SNMP Views
CLI Configuration Editor J-Web Configuration Editor Task
From the [edit] hierarchy level,
enter
edit snmp
1. In the J-Web interface, select Configuration>View
and Edit>Edit Configuration.
2. Next to Snmp, click Configure or Edit.
Navigate to the SNMP level
in the configuration
hierarchy.
Create a view:
set view view-name
1. Next to View, click Add new entry.
2. In the Name box, type the name of the view as a
free-form text string.
Create a view.
Set the pingMIB OID value and
mark it for inclusion:
set view view-name oid
1.3.6.1.2.1.80 include
1. Next to Oid, click Add new entry.
2. In the Name box, type the OID of the pingMIB , in
either dotted integer or subtree name format.
3. In the View action box, select include from the list,
and click OK.
Configure the view to include
a MIB—for example,
pingMIB .
Set the jnxPingMIB OID value and
mark it for exclusion:
set view view-name oid jnxPingMIB
exclude
1. Next to Oid, click Add new entry.
2. In the Name box, type the OID of the jnxPingMIB , in
either dotted integer or subtree name format.
3. In the View action box, select exclude from the list,
and click OK twice.
Configure the view to
exclude a MIB—for example,
jnxPingMIB .
Set the community view:
set community community-name view
view-name
1. On the Snmp page, under Community, click the
name of the community to which you want to apply
the view.
2. In the View box, type the view name.
3. Click OK.
Associate the view with a
community.
Verifying the SNMP Configuration
To verify the SNMP configuration, perform the following verification task.
Verifying SNMP Agent Configuration
Purpose Verify that SNMP is running and that requests and traps are being properly
transmitted.
Action From the CLI, enter the show snmp statistics command.
user@host> show snmp statistics
SNMP statistics:
Input:
Packets: 246213, Bad versions: 12 , Bad community names: 12,
Bad community uses: 0, ASN parse errors: 96,
Too bigs: 0, No such names: 0, Bad values: 0,
Read onlys: 0, General errors: 0,
Total request varbinds: 227084, Total set varbinds: 67,
58 ■ Verifying the SNMP Configuration
J-series™ Services Router Administration Guide