Juniper Networks J-Series - Manual (Page 147)

Table 58: Summary of Key CoS Classifier Output Fields (continued)
The classifiers are displayed by type:
■ dscp —All classifiers of the DSCP type.
■ dscp ipv6 —All classifiers of the DSCP
IPv6 type.
■ exp —All classifiers of the MPLS EXP
type.
■ ieee-802.1 —All classifiers of the IEEE
802.1 type.
■ inet-precedence —All classifiers of the
IP precedence type.
CoS Value Type
Internal index of the classifier. Index
CoS value of the incoming packets, in bits.
These values are used for classification. Incoming CoS Value
Forwarding class that the classifier assigns
to an incoming packet. This class affects the
forwarding and scheduling policies that are
applied to the packet as it transits the router. Assign to Forwarding Class
Loss priority value that the classifier assigns
to the incoming packet based on its CoS
value. Assign to Loss Priority
Monitoring CoS Value Aliases
To display information about the CoS value aliases that the system is currently using
to represent DSCP, DSCP IPv6, MPLS EXP, and IPv4 precedence bits, select
Monitor>Class of Service>CoS Value Aliases in the J-Web interface, or enter the
following CLI command:
show class-of-service code-point-aliases
Table 59 on page 126 summarizes key output fields for CoS value aliases.
Using the Monitoring Tools ■ 125
Chapter 7: Monitoring the Router and Routing Operations