Juniper Networks J-Series - Manual (Page 197)

Table 93: Summary of Key Alarm Output Fields (continued)
Additional Information Values Field
Date and time when the alarm condition was
detected. Received at
A major (red) alarm condition requires immediate action.
A minor (yellow) condition requires monitoring or
maintenance. Alarm severity—either major (red) or minor (yellow). Severity
Clicking the alarm subject displays a detailed alarm
message. Brief synopsis of the alarm. Subject
Detailed Alarm Message
Date and time when the failure was detected. Received at
A major (red) alarm condition requires immediate action.
A minor (yellow) condition requires monitoring or
maintenance. Alarm severity—either major (red) or minor (yellow). Severity
Category of the alarm:
■ Chassis—Indicates an alarm condition on the
chassis (typically an environmental alarm such
as temperature)
■ Configuration—Indicates that no rescue
configuration is set
■ ETHER—Indicates an alarm condition on an
Ethernet interface
■ DS3—Indicates an alarm condition on a DS3
interface
■ License—Indicates a software license
infringement
■ Serial—Indicates an alarm condition on a serial
interface
■ Services—Indicates an alarm condition on the
services module
Alarm Type
Verifying the Alarms Configuration
To verify alarms configuration, perform the following task.
Displaying Alarm Configurations
Purpose Verify the configuration of the alarms.
Action From the J-Web interface, select
Configuration>View and Edit>View Configuration Text. Alternatively, from
configuration mode in the CLI, enter the
show chassis alarms command.
[edit]
user@host# show chassis alarms
t3 {
Verifying the Alarms Configuration ■ 175
Chapter 9: Configuring and Monitoring Alarms