Juniper Networks J-Series - Manual (Page 142)

Table 54: Summary of Key OSPF Routing Output Fields (continued)
Additional Information Values Field
Number of the area that the interface is in. Area
Address of the area's designated router. DR ID
Address of the area's backup designated router. BDR ID
Number of neighbors on this interface. Nbrs
OSPF Statistics
Type of OSPF packet. Packet
Type
Total number of packets sent and received. Total
Sent/Total
Received
Total number of packets sent and received in the last
5 seconds. Last 5
seconds
Sent/Last 5
seconds
Received
Number and type of receive errors. Receive
errors
Monitoring RIP Routing Information
To view RIP routing information, select Monitor>Routing>RIP Information, or
enter the following CLI commands:
■ show rip statistics
■ show rip neighbors
Table 55 on page 120 summarizes key output fields in the RIP routing display.
Table 55: Summary of Key RIP Routing Output Fields
Additional Information Values Field
RIP Statistics
Information about RIP on the specified interface,
including UDP port number, hold-down interval (during
which routes are neither advertised nor updated), and
timeout interval. Rip info
Name of the logical interface on which RIP is
configured. Logical
interface
Number of RIP routes learned on the logical interface. Routes
learned
120 ■ Using the Monitoring Tools
J-series™ Services Router Administration Guide