Juniper Networks J-Series - Manual (Page 172)

Table 78: Summary of Key PPPoE Output Fields (continued)
Additional Information Values Field
Packets sent and received during the PPPoE
session, categorized by packet type and packet
error:
■ PADI —PPPoE Active Discovery Initiation
packets.
■ PADO —PPPoE Active Discovery Offer
packets.
■ PADR —PPPoE Active Discovery Request
packets.
■ PADS —PPPoE Active Discovery
Session-Confirmation packets.
■ PADT —PPPoE Active Discovery Terminate
packets.
■ Service Name Error —Packets for which the
Service-Name request could not be honored.
■ AC System Error —Packets for which the
access concentrator experienced an error in
processing the host request. For example,
the host had insufficient resources to create
a virtual circuit.
■ Generic Error —Packets that indicate an
unrecoverable error occurred.
■ Malformed Packet —Malformed or short
packets that caused the packet handler to
disregard the frame as unreadable.
■ Unknown Packet —Unrecognized packets.
Packet Type
Number of the specific type of packet sent from
the PPPoE client. Sent
Number of the specific type of packet received by
the PPPoE client. Received
Information about the timeouts that occurred
during the PPPoE session.
■ PADI—Number of timeouts that occurred for
the PADI packet.
■ PADO—Number of timeouts that occurred
for the PADO packet. (This value is always
0
and is not supported.
■ PADR—Number of timeouts that occurred
for the PADR packet.
Timeout
Number of the timeouts that occurred for PADI,
PADO, and PADR packets. Sent
PPPoE Version
Maximum number of active PPPoE sessions the
Services Router can support. The default is 256
sessions. Maximum Sessions
150 ■ Using the Monitoring Tools
J-series™ Services Router Administration Guide