Verifying rpm probe servers, Related topics – Juniper Networks J-Series User Manual
Page 310
Verifying RPM Probe Servers
Purpose
Verify that the Services Router is configured to receive and transmit TCP and UDP
RPM probes on the correct ports.
Action
From the CLI, enter the
show services rpm active-servers
command.
user@host> show services rpm active-servers
Protocol: TCP, Port: 50000
Protocol: UDP, Port: 50037
Meaning
The output shows a list of the protocols and corresponding ports for which the Services
Router is configured as an RPM server.
Related Topics
For a complete description of
show services rpm active-servers
output, see the JUNOS
System Basics and Services Command Reference.
288
■
Verifying RPM Probe Servers
J-series™ Services Router Administration Guide