Muratec MFX-2030 User Manual
Page 85
3-11
Using the Admin Tools
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
Using the
Admin
T
ools
“Default Setting”
Set the default tab that displayed first when you log-in
to “OfficeBridge”.
NOTE: If there is an unread document, after log-in, the tab
for that unread document will be displayed first.
NOTE: If the “Public Inbox”, “Bulletin Board”, “Circulate
Box”, or “Processing request” function is disabled,
the corresponding tab will not be displayed.
“Log-in Icon”
Selects the color of the icon indicating an active user in
“LDAP Server Log-in”
Enter the Account name and password used to log-in to
the LDAP server.
“Personal Available
Address”
Sets maximum number of destinations that the user can
register with the “Personal Address Book”.
NOTE: The maximum number that can be registered
vary according to the memory capacity.
“User Access”
When registering the user as an administrator, check
“Resister as Administrator”.
• Access Settings
When the administrator has been registered, the “User
Registration” cannot setup by the user other than
administrator. Also, an administrator may protect the
following items to keep other users from changing the
settings.
[Address Book]:
When this is checked, the following items are pro-
tected:
• Register and edit the shared address book.
• Import the information to the shared address book.
[Document Setup]:
When this is checked, the following items are pro-
tected:
• “Initial Settings”
• “Scan Settings”
• “Personal Outbox Settings”
• “Personal Inbox Settings”
• “Public Inbox Settings”
• “Bulletin Board Settings”
• “Circulated Box Settings”
• “Processing Request Settings”
[Network Settings]:
When this is checked, the following items are pro-
tected:
• “TCP/IP Settings”
• “SMTP/POP Settings”
• “E-mail Settings”
• “LDAP Settings”
[Device Settings]:
When this is checked, the “Device Settings” is pro-
tected.
• Select Read Only User
An administrator can specify the users permitted to
only read the protected items.