Muratec MFX-2030 User Manual
Page 140
3-66
Using the Admin Tools
Item
Description
“Name”
Enter the name for identification purposes.
“Server Name”
Enter the LDAP server name.
“IP Address”
Enter the IP address of the LDAP server.
• IP address is given to priority if both the LDAP server
name and IP address are registered.
“Port Number”
Enter the port number that the LDAP server is using.
The default port number is 389.
“Account”
Enter the account name used to log-on to the LDAP
server.
“Password”
Enter the password used to log-on to the LDAP server.
“Log-in Required”
If the LDAP server requires authentication, select “Yes”.
“User Log-in”
When it is set to “Yes”, the OfficeBridge users will be
prompted to enter an account name and password when
they access the LDAP server for searching a destination.
NOTE: This account name and password can be regis-
tered on the
“User Set-UP” screen
, in advance.
“Start Point”
Set the search start position when searching the LDAP
server.
“Maximum Results”
Enter the maximum number of search results to be
displayed.
• The number can be entered within the range of 1–100.
• The default number is 50.