Muratec MFX-2030 - Manual (Page 109)

3-35 Using the Admin Tools
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
Using the
Admin
T
ools
Setup
You can setup the initial setting for each function.
Initial Settings
In this dialog, you can set the initial setting of the “Document download” and “Tem-
porary stored document hold time”.
NOTE: If the administrator is registered, you should log-in as an administrator to
access this setting.
1
Log-in to OfficeBridge.
2
Click [Initial Settings] on the “Admin Tools” tab.
The “Initial Settings” screen will appear.
Item Description
“Download Settings” • “File Format”
Select either “PDF” or “TIFF” as the file format for
when files are downloaded.
• “Downloaded File”
This selects whether or not to delete a file from the
disk after it has been downloaded. To not delete, select
“Do not delete from disk”; to delete, select “Delete from
disk”.
“Temporary Document
Hold Time”
Sets the preservation period of a temporary stored docu-
ment to from 1 to 30 days. You can see the list of tempo-
rary stored document by clicking [Temporary Storage]
on the “Admin Tools” tab.
NOTE: The date on which the setting is made is not
included in the set number of days. For example,
if the preservation period is set to 1 day, the
document is preserved until the next day and at
the start of the day after next, the document is
deleted.
The factory setting is 1 day.
[Save] Select to register the settings.
[Close] Select to close the “Initial Settings” box.
3
Adjust the settings and select [Save] to register them.