Muratec MFX-2030 - Manual (Page 128)

3-54 Using the Admin Tools
TCP/IP settings
This sets the network environment for viewing received faxes and e-mails on a
MFP-connected computer or when using the MFP as a printer.
NOTE: If the administrator is registered, you should log-in as an administrator to
access this setting.
1
Log-in to “OfficeBridge”.
2
Click [TCP/IP] on the “Admin Tools” tab.
The “TCP/IP Settings” screen will appear.
3
Configure the settings, then click [Save] to save the settings.
4
If you entered or changed the “DHCP Setting”, “IP Address”, “Subnet Mask”,
“HTTP Port No.”, “Client Port No.”, or “InfoMonitor Port No.”, reboot the
machine to activate the new settings. To reboot the machine, turn the machine
off and after three or more seconds, turn it back on.