Muratec MFX-2030 - Manual (Page 103)

3-29 Using the Admin Tools
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
Using the
Admin
T
ools
Management Information
Device Settings
Registering device information
Registers specific device information to distinguish machines when multiple units
have been installed.
1
Log-in to OfficeBridge.
NOTE: If the administrator is registered, you should log-in as an administrator to edit
this setting.
2
Click [Device Settings] on the “Admin Tools” tab.
The “Device Settings” screen will appear.
Item Description
“Device Name” Enter the name of the main unit in order to identify the
device. The name may contain up to 40 characters.
“Installation Location” Enter the location where the main unit is installed, the
department where it is used (managed), etc.
The location may contain up to 100 characters.
“System Options” You may add options that have been installed, the con-
figuration of these devices, etc.
This may contain up to 200 characters.
“Network Connection” The current network communications speed and com-
munications method are displayed.
“Telephone Line
Status”
The current telephone line status is displayed.