Gateway 9415 - Manual (Page 51)

46 www.gateway.com
3
Lift the processor air duct from the chassis.
Removing the processor air dam
If you are adding a second processor to a single processor system, you need to remove the
air dam located on the underside of the processor air duct.
To remove the processor air dam:
1
Follow the instructions in “Preventing static electricity discharge” on page 41 . Make
sure that you turn off the server, then unplug the power cord(s) and all other cables
connected to the server.
2
Follow the instructions in “Opening the server case” on page 42 .
3
Follow the instructions in “Removing the processor air duct” on page 45 .
Caution If you add a second processor to your server, you must remove the
processor air dam or the processor may overheat, causing possible
data loss and damage to the processor.
8510522.book Page 46 Wednesday, March 16, 2005 11:19 AM