Gateway 9415 - Manual (Page 120)

115 www.gateway.com
To clear the BIOS password(s):
1
Turn off the server, then disconnect the power cords and all other cables connected
to the server.
2
Follow the instructions in “Opening the server case” on page 42 .
3
Remove the jumper across pins A1-A2, then place the jumper across pins A2-A3.
4
Follow the instructions in “Closing the server case” on page 44 .
5
Reconnect the power cords and turn on the server. The BIOS password(s) is cleared.
6
Turn off the server, then disconnect the power cords and all other cables connected
to the server.
7
Follow the instructions in “Opening the server case” on page 42 .
8
Place the jumper back onto pins A1-A2.
9
Follow the instructions in “Closing the server case” on page 44 .
Caution Moving the jumper while the power is on can damage your server.
Always turn off the server and unplug the power cords and all other
cables before changing the jumper.
8510522.book Page 115 Wednesday, March 16, 2005 11:19 AM