Mixed p-ata, S-ata – Gateway 9415 User Manual
Page 167
162
www.gateway.com
* See the following Caution before changing the
.
The following 2nd level submenus are accessed from the submenu indicated in the first
column.
Platform Event Filtering
Enabled
Disabled
Exit
Save Changes and Exit
(
F10
)
Discard Changes and Exit
(
ESC
key)
Discard Changes (
F7
)
Load Setup Defaults (
F9
)
Load Custom Defaults
Save Custom Defaults
Caution
Before changing modes, back up array data and delete existing
arrays, if any. Otherwise, loss of data may occur.
After operating system installation with a selected SCSI RAID mode,
only change this mode selection if you are prepared to rebuild the
RAID array. Changing the mode could damage the current operating
system installation on the RAID volume.
BIOS submenu
BIOS 2nd level
submenu
Setting
Value
IDE
Configuration
Mixed P-ATA /
S-ATA
First ATA Channel
P-ATA M-S
S-ATA M-S
Second ATA Channel
S-ATA M-S
None
BIOS menu
BIOS submenu
Setting
Value
8510522.book Page 162 Wednesday, March 16, 2005 11:19 AM