Gateway 9415 - Manual (Page 35)

30 www.gateway.com
To remove a BIOS security password:
1
Restart your server, then press F2 when the Gateway logo screen appears during
startup. The BIOS Setup utility opens.
2
Select the Security menu, then select the password to remove.
3
Enter the current password, then press E NTER .
4
For the new password, leave the password field blank, then press E NTER . The password
is removed.
Local control panel
The optional Local Control Panel (LCP) provides an intelligent front panel for the server
and lets you configure the server, monitor system status, and control the server from the
panel. The LCD panel has its own microcontroller and is independent of the operating
system. Its 4×20 display provides information directly from the Baseboard Management
Controller (BMC) using the IPMB bus.
Interactions
The LCP can:
■ Poll the BMC to determine alert conditions
■ Query the BMC for system event log entries
■ Display and control the power state of the server
■ Query the BMC for field replaceable units (FRUs)
■ Read BMC sensors
■ Retrieve BIOS POST progress codes
■ Issue IPMI commands to the BMC
■ Obtain BIOS-specific information from the BMC
In addition to the above, system software can also interact with the LCP to:
■ Write characters to the LCP
■ Read characters from the LCP
Tips & Tricks Passwords can also be cleared using jumpers on the system board.
For instructions, see
“Resetting BIOS passwords” on page 114 .
8510522.book Page 30 Wednesday, March 16, 2005 11:19 AM