Gateway 9415 - Manual (Page 116)

111 www.gateway.com
To recover the old BIOS:
1
Turn on or restart the server.
2
Press and hold C TRL +H OME . The old BIOS is recovered.
To manually recover the BIOS:
1
Turn off the server, then disconnect the power cords and all other cables connected
to the server.
2
Follow the instructions in “Opening the server case” on page 42 .
3
Remove the jumper across pins B1-B2, then place the jumper across pins B2-B3.
4
Follow the instructions in “Closing the server case” on page 44 .
Caution Moving the jumper while the power is on can damage your server.
Always turn off the server and unplug the power cords and all other
cables before changing the jumper.
8510522.book Page 111 Wednesday, March 16, 2005 11:19 AM