Gateway 9415 - Manual (Page 117)

112 www.gateway.com
5
Insert a bootable USB “disk-on-key” containing a valid BIOS image into a USB port.
6
Reconnect the power cords and turn on the server. The BIOS recovery is initiated.
While the BIOS is being recovered, the monitor displays a blue screen and the server
will beep continually. The process is complete when the server stops beeping.
7
Remove the bootable USB “disk-on-key.”
8
Turn off the server, then disconnect the power cords and all other cables connected
to the server.
9
Follow the instructions in “Opening the server case” on page 42 .
10
Place the jumper back onto pins B1-B2.
11
Follow the instructions in “Closing the server case” on page 44 .
12
Plug in the AC power cords and turn on the server, then verify that the recovery was
successful.
8510522.book Page 112 Wednesday, March 16, 2005 11:19 AM