FUJITSU PRIMERGY RX600 S5 - Manual (Page 78)

78 Operating Manual RX600 S5
Configuring the server Starting up and operation
©
c
ogn
it as
. G
e s e
lls
c h
ft f
ü r T
e
c h ni
k -D
o
k u m
e n
tat
ion m
b H
20
10
P
fa
d : C
:\ P
rogra
m
m
e \F
CT
\t im
_a
pp
\t im
_l
o
c a
l\ w
or
k \P
ICH
OL
\O
B
J _ D
O
K U
-4
8 8
8 -0
03
.f
m
5.3 Configuring the server
This section contains information about configuring the server and installing the
operating system.
I
Make sure that the energy saving functions are disabled in the BIOS
Setup during server operation.
5.3.1 Configuring the SAS/SATA RAID controller card
The server comes with a SAS/SATA RAID controller with "MegaRAID
functionality". You can configure the SAS/SATA RAID controller either before or
during installation with the ServerView Installation Manager. Using the
ServerView Installation Manager is recommended.
I
A separate utility is available to the controller for MegaRAID
configuration. For further information, refer to the "SAS Software User’s
Guide" (on the ServerView Suite DVD 2 under
Industry Standard Servers -
Expansion Cards - Storage Adapters - LSI Configuration Software ).
Further information on modular RAID controllers is provided in the
"Modular RAID Controller Installation Guide" (on the ServerView Suite
DVD 2 under
Industry Standard Servers - Expansion Cards - Storage Adapters
- LSI RAID / SCSI Controllers ).
I
Descriptions of operating systems not covered in the controller manual
are provided in the corresponding readme files on the driver CDs.