FUJITSU PRIMERGY RX600 S5 - Manual (Page 122)

122 Operating Manual RX600 S5
Non-hot-plug components CSS components
©
c
ogn
it as
. G
e s e
lls
c h
ft f
ü r T
e
c h ni
k -D
o
k u m
e n
tat
ion m
b H
20
10
P
fa
d : C
:\ P
rogra
m
m
e \F
CT
\t im
_a
pp
\t im
_l
o
c a
l\ w
or
k \P
ICH
OL
\O
B
J _ D
O
K U
-4
8 9
1 -0
03
.f
m
8.2.1 Identifying the defective CSS component
Ê Open the server (see "Opening/Closing the server" on page 134 ).
Ê Press the Indicate CSS button on the system board (see Technical Manual
for the system board D2870 on the ServerView Suite DVD 2).
The PRIMERGY Diagnostic LED of the defective CSS component lights up
orange, thereby indicating which CSS component on the system board must
be replaced (see Technical Manual for details).
8.2.2 Replacing a non-hot-plug expansion card
8.2.2.1 Removing a non-hot-plug expansion card
Ê If necessary, remove all cables from the expansion card.
Ê Open the expansion card lock by lifting it up (see pos. #2 in figure 28 on
page 109 ).
The expansion card is now mechanically unlocked.
Ê Hold the removal tool by the green handle and pull it out of the PCI slot
together with the expansion card (see pos. #3 in
figure 28 on page 109 ).
I
Do not pull on the expansion card itself.