Identifying faults detected by psh, Identifying faults detected by psh” on – FUJITSU T5440 User Manual
Page 70
48
SPARC Enterprise T5440 Server Service Manual • June 2011
■
“POST Fault Management Flowchart” on page 23
■
SPARC Enterprise T5440 Server Administration Guide
Identifying Faults Detected by PSH
When a PSH fault is detected, a Oracle Solaris console message is displayed, similar
to the following example.
EXAMPLE:
Console Message Showing Fault Detected by PSH
Faults detected by the Oracle Solaris PSH facility are also reported through service
processor alerts.
Note –
You can configure ILOM to generate SNMP traps or e-mail alerts when a
fault is detected by Oracle Solaris PSH. You can also configure the ALOM CMT
compatibility shell to display Oracle Solaris PSH alerts. See the Integrated Lights Out
Manager 3.0 Concepts Guide.
The following example depicts an ALOM CMT alert of the same fault reported by
Oracle Solaris PSH in
EXAMPLE: Console Message Showing Fault Detected by PSH
.
SUNW-MSG-ID: SUN4V-8000-DX, TYPE: Fault, VER: 1, SEVERITY: Minor
EVENT-TIME: Wed Sep 14 10:09:46 EDT 2005
PLATFORM: SUNW,
system_name, CSN: -, HOSTNAME: wgs48-37
SOURCE: cpumem-diagnosis, REV: 1.5
EVENT-ID: f92e9fbe-735e-c218-cf87-9e1720a28004
DESC: The number of errors associated with this memory module has exceeded
acceptable levels. Refer to http://sun.com/msg/SUN4V-8000-DX for more
information.
AUTO-RESPONSE: Pages of memory associated with this memory module are being
removed from service as errors are reported.
IMPACT: Total system memory capacity will be reduced as pages are retired.
REC-ACTION: Schedule a repair procedure to replace the affected memory module.
Use fmdump -v -u