Install the service processor – FUJITSU T5440 User Manual

Page 148

126

SPARC Enterprise T5440 Server Service Manual • June 2011

■

Install the IDPROM onto the new service processor. See

▼ Install the Service Processor

1. Ensure that the power cords are disconnected from the system.

2. Lower the service processor into position.

Ensure that the service processor is oriented correctly over the motherboard
connector and the two snap-on standoffs.

3. Press down evenly to plug the service processor into the motherboard.

4. Secure the service processor with the two captive No.2 Phillips screws.

Next Steps

■