beautypg.com

View ilom event log, Detecting faults (oracle vts software) – FUJITSU T5440 User Manual

Page 63

background image

Managing Faults

41

▼ View ILOM Event Log

Type the following command:

Note –

The ILOM event log can also be viewed through the ILOM BUI or the ALOM

CMT CLI.

If a “major” or “critical” event is found that was not expected and not included
under ILOM show faulty than it may indicate a system fault. The following is an
example of unexpected major events in the log.

Detecting Faults (Oracle VTS Software)

This topic includes the following:

“About Oracle VTS Software” on page 42

“Verify Installation of Oracle VTS Software” on page 42

“Start the Oracle VTS Browser Environment” on page 43

“Oracle VTS Software Packages” on page 45

“Useful Oracle VTS Tests” on page 46

-> show /SP/logs/event/list

-> show /sp/logs/event/list

1626 Fri Feb 15 18:57:29 2008 Chassis Log major

Feb 15 18:57:29 ERROR: [CMP0 ] Only 4 cores, up to 32 cpus are

configured because some L2_BANKS are unusable

1625 Fri Feb 15 18:57:28 2008 Chassis Log major

Feb 15 18:57:28 ERROR: System DRAM Available: 004096 MB

1624 Fri Feb 15 18:57:28 2008 Chassis Log major

Feb 15 18:57:28 ERROR: [CMP1 ] memc_1_1 unused because associated

L2 banks on CMP0 cannot be used

1623 Fri Feb 15 18:57:27 2008 Chassis Log major

Feb 15 18:57:27 ERROR: Degraded configuration: system operating at

reduced capacity

1622 Fri Feb 15 18:57:27 2008 Chassis Log major

Feb 15 18:57:27 ERROR: [CMP0] /MB/CPU0/CMP0/BR1 neither channel

populated with DIMM0 Branch 1 not configured