FUJITSU T5440 - Manual (Page 142)

120 SPARC Enterprise T5440 Server Service Manual • June 2011
Related Information
■ “Servicing the DVD-ROM Drive” on page 122
▼ Remove the Front Bezel
Before you begin, complete these tasks:
■ Read the section, “Safety Information” on page 63 .
■ If you are performing additional service procedures, power off the server, using
one of the methods described in the section,
“Powering Off the System” on
page 67 .
■ “Extend the Server to the Maintenance Position” on page 70
■ “Perform Electrostatic Discharge – Antistatic Prevention Measures” on page 73
Do the following :
1. Grasp the front bezel on the left and right sides.
2. Pull the bezel off of the front of the chassis.
The bezel is secured with three snap-in posts.