FUJITSU T5440 - Manual (Page 178)

156 SPARC Enterprise T5440 Server Service Manual • June 2011
FIGURE: Sliding the server into the rack.
2. While pushing on the release buttons, slowly push the server into the rack.
Ensure that the cables do not get in the way.
3. If necessary, re-attach the CMA.
a. Attach the CMA support strut to the inner glide.
b. Attach the CMA to the inner glide.
Slide the hinge plate into the end of the outer rail until the retaining pin snaps
into place.
4. Reconnect the cables to the back of the server.
If the CMA is in the way, slide the server partially out of the cabinet to access the
necessary rear panel connections.
Figure Legend
1 Inner rail release button
2 Slide rail lock