FUJITSU T5440 - Manual (Page 160)

138 SPARC Enterprise T5440 Server Service Manual • June 2011
2. Tighten the three captive No. 2 Phillips screws.
3. Plug the cable into its connector on the backplane.
4. Install the flex cable retainer.
Place the retainer into position and tighten the captive No.2 Phillips screw.
Next Steps
■ “Install the Fan Tray Carriage” on page 134
■ “Install a Fan Tray” on page 88
■ “Install a CMP/Memory Module” on page 105
■ “Install the Top Cover” on page 154
■ “Install a Hard Drive” on page 82
Note – You must install the hard drives in the correct slots.
■ “Slide the Server Into the Rack” on page 155
■ “Power On the Server” on page 157