FUJITSU T5440 User Manual

Page 50

SPARC Enterprise T5440 Server Service Manual • June 2011

EXAMPLE:

Output of the show components Command With No Disabled Components

EXAMPLE:

Output of the show components Command Showing Disabled Components

▼ Display Individual Component Information

(ILOM show Command)

Use the show command to display information about individual components in the
server.

●

At the -> prompt, enter the show command.

, the show command is used to

get information about a memory module (FB-DIMM).

-> show components

Target | Property | Value

--------------------+------------------------+-------------------------------

/SYS/MB/PCIE0 | component_state | Enabled

/SYS/MB/PCIE3/ | component_state | Enabled

/SYS/MB/PCIE1/ | component_state | Enabled

/SYS/MB/PCIE4/ | component_state | Enabled

/SYS/MB/PCIE2/ | component_state | Enabled

/SYS/MB/PCIE5/ | component_state | Enabled

/SYS/MB/NET0 | component_state | Enabled

/SYS/MB/NET1 | component_state | Enabled

/SYS/MB/NET2 | component_state | Enabled

/SYS/MB/NET3 | component_state | Enabled

/SYS/MB/PCIE | component_state | Enabled