Power supply led, Leds. see – FUJITSU T5440 User Manual
Page 117
Servicing Customer-Replaceable Units
95
Note –
Power supply names in ILOM messages are displayed with the full FRU
name, such as /SYS/PS0.
Related Information
■
■
“Hot-Pluggable and Hot-Swappable Devices” on page 75
Power Supply LED
Each power supply contains a dual-color LED that is visible when looking at the
back panel of the system.
The following table includes a description of power supply LED modes and their
function, listed from top to bottom.
The following LEDs are lit when a power supply fault is detected:
■
Front and rear Service Required LEDs
■
Rear PS Failure LED on the bezel of the server
■
Fault LED mode on the faulty power supply
The front and rear panel Service Required LEDs are also lit if the system detects a
power supply fault.
See
for more
information about identifying and interpreting system LEDs.
LED State
Meaning
Notes
Off
No AC present
Power supply is unplugged or if no AC power
is present.
Blinking green
AC present/system
in standby
AC power is present and system is in standby
mode.
Green
AC present/system
powered on
System is powered on.
Blinking amber
Fault
Voltage overcurrent or other power fault.
Amber
Fault
Internal power supply failure or power supply
fan failure.