FUJITSU T5440 - Manual (Page 127)

Servicing Customer-Replaceable Units 105
▼ Install a CMP/Memory Module
Note – If you are replacing a faulty CMP or memory module, you must transfer the
FB-DIMMs on the faulty module to the replacement module. Replacement
CMP/memory modules do not include FB-DIMMs.
For more information about installing FB-DIMMs, see “Servicing FB-DIMMs” on
page 108
1. Identify the correct slot for installation.
2. Slide the module down into its slot.
3. Rotate the ejector levers down to secure the module into place.
Next Steps
■ “Install the Top Cover” on page 154
■ “Slide the Server Into the Rack” on page 155
■ “Power On the Server” on page 157
▼ Add a CMP/Memory Module
Before you begin, complete these tasks:
■ Read the section, “Safety Information” on page 63 .