Remove a power supply – FUJITSU T5440 User Manual

Page 114

SPARC Enterprise T5440 Server Service Manual • June 2011

3. Reconnect the power cord to the power supply.

Verify that the power supply LED is green or blinking green.

4. Verify that the system Power Supply Fault LED, and the front and rear Service

Required LEDs are not lit.

Note –

See

and

for more

information about identifying and interpreting system LEDs.

5. At the ILOM -> prompt, use the show faulty command to verify the status of

the power supplies.

▼ Remove a Power Supply

Caution –

Hazardous voltages are present. To reduce the risk of electric shock and

danger to personal health, follow the instructions.