FUJITSU T5440 - Manual (Page 156)

134 SPARC Enterprise T5440 Server Service Manual • June 2011
■ “Remove a CMP/Memory Module” on page 104
Note – You must remove all CPU modules and memory modules from the system.
Do the following:
1. Remove the nine No. 1 Phillips screws securing the fan tray carriage to the top
of the chassis.
2. Loosen the seven captive No. 2 Phillips securing the bottom of the fan tray
carriage to the motherboard assembly.
3. Lift the fan tray carriage up and out of the system.
▼ Install the Fan Tray Carriage
1. Lower the fan tray carriage into the system.