FUJITSU TX300 - Manual (Page 95)

TX300 S6 Options Guide 95
Further options TPM
Figure 67: Securing the TPM
Ê Insert the TPM on the system board (1).
Ê Fasten the TPM with the special screw for the TPM (2).
Please use the TPM screwdriver insert bit to tighten the special screw.
I
Do not fasten the screw too tightly (torque value of 0.6 Nm).
Ê Reinstall the hot-plug power supply unit in its slot (description see the
Operating Manual).
Ê Close the server, connect it to the power outlet, and switch it on as described
in the
chapter "Completion" on page 105 .
I
You can find information on configuring the TPM in the "D2619-N BIOS
Setup Utility for PRIMERGY RX300 S6 and TX300 S6" manual.
ባ
ባ
ቢ