FUJITSU TX300 - Manual (Page 112)

112 Options Guide TX300 S6
Rack model Completion
11.3.2 Closing the server
Ê Pull the locking lever as far as it will go and insert the top cover (see also
figure 84 on page 110 ).
Ê Push the top cover against the housing and push down the locking lever at
the same time.
Closing the locking lever pushes the top cover forward and the hooks on the
right edge of the top cover engage.
If you have not removed the server from the rack cabinet, please skip steps 1-4.
V
CAUTION!
At least two people are required to install the server in the rack cabinet.
Do not use the handles on the rack front cover to lift the server into the
rack.
Figure 86: Inserting the server (a)
0
1
/
/