FUJITSU TX300 - Manual (Page 52)

52 Options Guide TX300 S6
Replacing the heat sink Processors
6.3 Replacing the heat sink
Ê Open the server and remove the fan carrier as described in the chapter
"Preparation" on page 27 .
Ê Remove the heat sink as described in the section "Replacing the processor"
on page 47 .
Ê Remove the protective cover from the new heat sink (see figure 18 on
page 45 ).
Ê Install the new heat sink as described in the section "Replacing the
processor" on page 51 .
Ê Reinstall the fan carrier as described in the section "Installing the fan carrier"
on page 105 .
Ê Close the server, connect it to the power outlet, and switch it on as described
in the
chapter "Completion" on page 105 .