Fortinet FortiMail 3.0 MR4 - Manual (Page 339)

set system route number
FortiMail™ Secure Messaging Platform Version 3.0 MR4 CLI Reference
06-30004-0420-20080814
339
system route number
Use this command to set and configure system routing.
Syntax
set system route number dev1 {auto | port1} dst
gw1
History
Related topics
• set system interface config
• set system interface mode static
Keywords and Variables Description
number Enter the number of the route in the routing table. The default route is 0.
dev1 {auto | port1} Sets the FortiMail traffic-routing interface to auto or port1.
In auto, the FortiMail unit routes traffic to the interface that is on the same subnet
as gw1.
dst Sets the FortiMail unit route destination IP address and IP address mask.
is the destination IP address. is the IP address mask.
gw1 Sets the FortiMail unit route primary gateway IP address.
is the primary gateway IP address.
FortiMail v3.0 New.