Fortinet FortiMail 3.0 MR4 - Manual (Page 338)

FortiMail™ Secure Messaging Platform Version 3.0 MR4 CLI Reference
338 06-30004-0420-20080814
system option set
system option
Use these commands to configure FortiMail administration including:
• timeout on the admin account
• when to start the backend user verification
• web-based manager language
• PIN for the LCD panel
• the refresh interval for the GUI interface
Syntax
set system option [ option1 .. ]
The options and their values are as follows:
History
Related topics
• set system admin
• set system appearance
admintimeout Use this command to set the idle time-out for system administration. Idle Timeout
controls the amount of inactive time that the web-based manager waits before
requiring the administrator to log in again.
is the idle timeout number in minutes. The default idle time out is 5
minutes. The maximum idle time out is 480 minutes (8 hours).
To improve security, keep the idle timeout at the default value of 5 minutes.
backend_verify Use this command to set the start time of the backend user verification program.
The time is specified in hours (hh), minutes (mm), and seconds (ss). It is in 24 hour
format.
language Use this command to set the language for the web-based manager to use.
can be one of english, simplifiedchinese, japanese, korean, or
traditionalchinese.
lcdpin Use this command to set the 6 digit personal identification number (PIN) on the
FortiMail LCD panel. Once set, the PIN must be entered to make any changes from
the front panel.
The PIN is only used when lcdprotection is enabled.
lcdprotection
{enable | disable}
Use this command to turn on the FortiMail front panel LCD password protection. To
set the PIN, use the lcdpin keyword.
refresh
{interval | none}
User this command to set or disable the GUI interface refresh interval.
FortiMail v3.0 New.