Fortinet FortiMail 3.0 MR4 - Manual (Page 221)

set log setting syslog
FortiMail™ Secure Messaging Platform Version 3.0 MR4 CLI Reference
06-30004-0420-20080814
221
log setting syslog
Use this command to configure logging to the Syslog server.
Syntax
To configure logging to the Syslog server
set log setting syslog status {enable | disable}
set log setting syslog server
set log setting syslog port
set log setting syslog number
set log setting syslog csv {enable | disable}
set log setting syslog loglevel
set log setting syslog facility {alert | audit | auth | authpriv | clock
| cron | daemon | ftp | kern | lpr | mail | news | netp | local10 |
local 1 | local2 | local3| local4 | local5 | local6 | local7}
History
Keywords/Variables Description Default
status
{enable | disable}
Enable or disable logging to the remote syslog server. disable
server Sets the remote host, syslog server, IP address. No default
port Sets the port number for logging to the Syslog server. 514
number Sets what syslog server receives logs sent from the
FortiMail unit. When you use number, you need to
include the server IP address when entering a number.
For example, set log setting syslog number 2
server 172.20.16.155
.
No default
csv {enable | disable} Enable or disable formatting for CSV format. disable
loglevel Sets the log severity level for the logging device. Use the
? to list the following log levels:
0=Emergency
1=Alert
2=Critical
3=Error
4=Warning
5=Notification
6=Information
Logs will include items of the level you set and higher.
Set level to 6 if you want to include all log severity levels. Emergency
facility {alert | audit
| auth | authpriv |
clock | cron | daemon |
ftp | kern | lpr | mail |
news } netp | local10 |
local 1 | local2 |
local3| local4 | local5
| local6 | local7}
Sets the facility identifier used for all log entries sent to
the syslog server by the FortiMail unit. Facility can help
identify the source of log entries on the syslog server. kern
FortiMail v2.8 New.
FortiMail 3.0MR1 Added number keyword.