HP 2600/2700 User Manual
Page 66
1
Make sure you have paper loaded in the input tray.
2
Load the first page of your original face down on the right front corner of the glass.
3
Press
Copy
, if not already lit.
4
Press
Start Copy Black
.
5
Remove the first page from the glass and load the second page.
6
Press
Start Copy Black
.
Make a 10by 15cm (4by 6inch) borderless copy of a photo
For the best quality when copying a photo, load photo paper in the input tray and
change your copy settings for the correct paper type and photo enhancement. You
might also want to use the photo print cartridge for superior print quality. With the tri-
color and photo print cartridges installed, you have a six-ink system. For more
information, see
1
Load 10 by 15 cm (4 by 6 inch) photo paper in the input tray.
2
Load your original photo face down on the right front corner of the glass.
Position the photo on the glass so the long edge of the photo is along the front
edge of the glass.
3
Press
Start Copy Color
.
The HP all-in-one makes a 10 by 15 cm (4 by 6 inch) borderless copy of your
original photo, as shown below.
Tip
If the output is not borderless, then set the paper size to
10x15 cm
Borderless
or
4x6 Borderless
, set the paper type to
Photo Paper
, set the
Photo
enhancement, and then try again.
For more information on setting the paper size, see
.
For information on setting the paper type, see
.
For information on setting the
Photo
enhancement, see
.
Copy a 10by 15cm (4by 6inch) photo onto a full-size
page
You can use the
Fill Entire Page
setting to automatically enlarge or reduce your
original to fill the printable area of the paper size loaded in the input tray. In this
example,
Fill Entire Page
is used to enlarge a 10 by 15 cm (4 by 6 inch) photo to
create a full-size borderless copy. When copying a photo, you might want to use the
photo print cartridge for superior print quality. With the tri-color and photo print
User Guide
63
Use
the
copy
features