HP 2600/2700 - Manual (Page 193)

1 Telephone wall jack
2 Coupler
3 Phone cord supplied in the box with the HP all-in-one
I am having problems faxing over the Internet
Solution
Check the following:
●
The FoIP service might not work properly when the HP all-in-one is sending
and receiving faxes at high speed (33600bps). If you experience problems
sending and receiving faxes, use a slower fax speed. You can do this by
changing the
Fax Speed setting from High (the default) to Medium . For
information on changing this setting, see Set the fax speed .
● You can only send and receive faxes by connecting a phone cord to the port
labeled "1-LINE" on the HP all-in-one and not from the Ethernet port. This
means that your connection to the Internet must be done either through a
converter box (which supplies regular analog phone jacks for fax connections)
or your telephone company.
● You should also check with your telephone company to make sure their
Internet phone service supports faxing. If they do not support faxing, you will
not be able to send and receive faxes through the Internet.
HP Instant Share setup issues
HP Instant Share setup errors (such as might be involved in setting up your
HP Passport account or Address Book) are covered in the HP Instant Share service
screen-specific help. Specific operational troubleshooting information is provided in the
HP Instant Share troubleshooting .
Use this section to solve HP Instant Share errors generated as a result of the way the
device was set up.
Minimum installation error
Chapter 16
190 HP Photosmart 2600/2700 series all-in-one
Troubleshooting
information