HP 2600/2700 - Manual (Page 54)

Setting Description
2. Image Size Lets you set the size at which you want the image
printed. Most choices are self-explanatory, but two
require some explanation:
Fill Entire Page and Fit to
Page .
The Fill Entire Page setting scales the image to cover
all of the printable area on the paper. If you inserted
photo paper in the input tray, there will not be a white
border around the photo. Some cropping may occur.
Fit
to Page scales the image to cover as much of the page
as possible while keeping the original aspect ratio
without cropping. The image is centered on the page
and is surrounded by a white border.
3. Tray Select Lets you select the input tray (front or rear) that the
HP all-in-one should use. This setting is only available if
a rear tray is detected when you turn on the HP all-in-
one.
4. Paper Size Lets you select the paper size for the current print job.
The
Automatic setting defaults to a large (letter or A4)
and small 10 by 15 cm (4 by 6 inch) paper size that
varies by country/region. When
Paper Size and Paper
Type are both set to Automatic , the HP all-in-one
selects the best print options for the current print job.
The other
Paper Size settings let you override the
automatic settings.
5. Paper Type Lets you select the paper type for the current print job.
The
Automatic setting lets the HP all-in-one detect and
set the paper type automatically. When Paper Size and
Paper Type are both set to Automatic , the HP all-in-
one selects the best options for the current print job. The
other
Paper Type settings let you override the automatic
settings.
6. Layout Style Lets you select one of three layout styles for the current
print job.
The
Paper Saver layout fits as many photos on the
paper as possible, rotating and cropping photos if
necessary.
The
Album layouts keep the orientation of the original
photos. Some cropping might occur.
7. Smart Focus Lets you enable or disable automatic digital sharpening
of photos.
Smart Focus affects only printed photos. It
does not change the appearance of photos on the color
graphics display or the actual image file on the memory
card.
Smart Focus is enabled by default.
User Guide 51
Memory
Card and PictBridge