HP 2600/2700 - Manual (Page 141)

Send photos from a memory card
Your HP all-in-one gives you the option to send photos immediately upon inserting a
memory card, or insert the memory card and send photos at a later time. To send
photos immediately, insert the memory card into the appropriate card slot, select one or
more photos, and press
HP Instant Share on the control panel.
If you insert the memory card, and then decide to send the photos at a later time, you
will find that when you come back to your HP all-in-one it has gone into idle mode.
Simply press
HP Instant Share and follow the prompts to select and share photos.
Note For more information on using a memory card, see Use a memory card or
PictBridge camera .
To send a photo to your friend or relative's network-connected device
1 Ask your friend or relative (recipient) for the name he assigned to his network-
connected device.
Note The device name is assigned when you set up your HP Instant Share
account and register your HP all-in-one. The device name is not case
sensitive.
2 Verify that the recipient either is receiving in Open mode or has included your HP
Passport user ID in the access list for the receiving device.
For more information, see
Receive from any sender (Open mode) and Use the
HP Instant Share access list .
3 Create a destination using the device name you obtained from the recipient.
For more information, see
Create destinations .
4 Press HP Instant Share to send your photos.
For more information, see the following procedure.
To send photos immediately upon inserting your memory card
1 Make sure the memory card is inserted into the appropriate card slot on your
HP all-in-one.
2 Select one or more photos.
For more information on selecting photos, see
Use a memory card or PictBridge
camera .
Note Movie file types might not be supported by the HP Instant Share service.
3 From the control panel of your HP all-in-one, press HP Instant Share .
The Share Menu appears on the color graphics display.
The Share Menu displays the destinations you created on the HP Instant Share
service. For more information, see Create destinations .
4 Use the and arrows to highlight a destination to which you want to send your
photos.
5 Press OK to select the destination and send your photos.
Note You can also use the Photo button to send images from your memory card. For
more information, see Use a memory card or PictBridge camera .
To insert the memory card and send photos at a later time
1 Insert the memory card into the appropriate slot on your HP all-in-one.
Chapter 13
138 HP Photosmart 2600/2700 series all-in-one
Use HP
Instant
Share
(networked)