HP 2600/2700 - Manual (Page 120)

4 When the current fax number appears, press to erase it.
5 Enter the new fax number.
6 Press OK to save the new number.
The visual keyboard automatically appears on the color graphics display.
7 Use the visual keyboard to change the name.
For more information on using the visual keyboard, see
Enter text and symbols .
8 Press OK .
9 Press 1 to update another speed-dial entry, or press Cancel to exit.
Delete speed-dial entries
You can delete an individual or group speed-dial entry.
1
Press Setup .
2 Press 3 , and then press 2 .
This displays the Speed Dial Setup menu and then selects Delete Speed Dial .
3 Press or until the speed-dial entry that you want to delete appears, and then
press
OK to delete it. You can also enter the speed-dial code by using the keypad
on the control panel.
4 Press 1 to delete another speed-dial entry, or press Cancel to exit.
Change the fax resolution and lighter/darker settings
You can change the fax Resolution and Lighter/Darker settings for documents that
you are faxing.
Change the fax resolution
The Resolution setting affects the transmission speed and quality of faxed black-and-
white documents. The HP all-in-one sends faxes at the highest resolution supported by
the receiving fax machine. You can only change the resolution for faxes that you are
sending in black and white. All color faxes will be sent using
Fine resolution. The
following resolution settings are available:
●
Fine : provides high-quality text suitable for faxing most documents. This is the
default setting.
● Photo : provides the best quality fax when sending photographs. If you choose
Photo , be aware that the faxing process takes longer to complete. When faxing
photographs, we recommend that you choose Photo .
● Standard : provides the fastest possible fax transmission with the lowest quality.
This setting returns to the default setting five minutes after the job has been completed,
unless you set your changes as the default. For information, see
Set new default
settings .
To change the resolution from the control panel
1 Load the first page face down on the right front corner of the glass.
2 Press Fax .
This displays the Enter Fax Number screen.
3 Enter the fax number by using the keypad.
4 Press Fax again, and then press 1 .
This displays the Fax Menu and then selects Resolution .
5 Press to select a resolution setting, and then press OK .
6 Press Start Black .
User Guide 117
Use the
fax
features