HP 2600/2700 - Manual (Page 65)

Change default copy settings
When you change copy settings from the control panel, the settings apply only to the
current copy job. To apply copy settings to all future copy jobs, you can save the
settings as defaults.
When you change copy settings from the control panel or the HP Director, the settings
apply only to the current copy job. To apply copy settings to all future copy jobs, you can
save the settings as defaults.
1
Make any needed changes to the settings in the Copy Menu .
2 Press 0 to select Set New Defaults from the Copy Menu .
3 Press OK to accept the settings as the new default settings.
The settings you specify here are only saved on the HP all-in-one itself. They do not
adjust the settings in the software. If you use the HP Director to control the settings on
copies you make, you should set your most frequently used settings as the defaults in
the HP Copy dialog box. To learn how, see the onscreen HP Image Zone Help.
Make multiple copies of the same original
You set the number of copies that you want to print by using the Number of Copies
option in the Copy Menu .
1 Make sure you have paper loaded in the input tray.
2 Load your original face down on the right front corner of the glass.
3 Press Copy , and then press 1.
This displays the Copy Menu and then selects Number of Copies .
4 Press or use the keypad to enter the number of copies, up to the maximum, and
then press
OK .
(The maximum number of copies varies by model.)
Tip If you hold down either of the arrow buttons, the number of copies changes by
increments of 5 to make it easier to set a large number of copies.
5 Press Start Copy Black or Start Copy Color .
In this example, the HP all-in-one makes three copies of the original 10 by 15 cm (4
by 6 inch) photo.
Copy a two-page black-and-white document
You can use the HP all-in-one to copy a single- or multiple-page document in color or
black and white. In this example, the HP all-in-one is used to copy a two-page black-
and-white original.
Chapter 7
62 HP Photosmart 2600/2700 series all-in-one
Use
the copy features