HP 2600/2700 - Manual (Page 58)

Deselect photos
You can deselect photos from the control panel.
➔ Do one of the following:
– Press OK to deselect the currently selected photo shown in the display.
– Press Cancel to deselect all photos and return to the idle screen.
Print photos from a PictBridge-compatible digital camera
The HP all-in-one supports the PictBridge standard, which lets you connect any
PictBridge-compatible camera to the camera port and print photos contained on the
memory card in the camera.
1
Connect your PictBridge-compatible digital camera to the camera port on the front
of your HP all-in-one using the USB cable supplied with your camera.
2 Turn on your camera and make sure it is in PictBridge mode.
Note When the camera is connected correctly, the status light next to the memory card
slots is illuminated. The status light blinks green when printing from the camera.
If the camera is not PictBridge-compliant or is not in PictBridge mode, the status
light blinks amber and an error message displays on your computer monitor (if
you have the HP all-in-one software installed). Disconnect the camera, correct
the problem on the camera and reconnect. For more information about
PictBridge camera port troubleshooting, see the onscreen Troubleshooting
Help that came with your HP Image Zone software.
After you successfully connect your PictBridge-compliant camera to the HP all-in-one,
you can print your photos. Make sure the size of the paper loaded in the HP all-in-one
matches the setting on your camera. If the paper size setting on your camera is set to
the default, the HP all-in-one uses the paper that is currently loaded in the input tray.
Refer to the user guide that came with your camera for detailed information on printing
from the camera.
Tip If your digital camera is an HP model that does not support PictBridge, you can
still print directly to the HP all-in-one. Connect the camera to the USB port on the
back of the HP all-in-one instead of to the camera port. This works with HP digital
cameras only.
Use quick print to print the current photo
You can use the Quick Print feature to print the photo currently being viewed on the
color graphics display.
1
Insert the memory card into the appropriate slot on your HP all-in-one.
2 Navigate to a photo you want to print.
3 Press Start Black or Start Color to print the photo using the current settings.
Print a DPOF file
The Digital Print Order Format (DPOF) is an industry-standard file that can be created
by some digital cameras. Camera-selected photos are photos you marked for printing
with your digital camera. When you select photos with your camera, the camera creates a
User Guide 55
Memory
Card and PictBridge