Datacard Group ImageCard SelectTM and UltraGrafix SelectTM Printers - Manual (Page 68)

5-10
Troubleshooting
#
Obtain guidance from service before performing this task.
User’s Guide for ImageCard® Select™ and UltraGrafix® Select™ Printers
Printed card images
(photos) are blurry.
Printed cards, including
text, are blurry.
The image capture system
needs adjustment.
The rollers may be dirty.
The cards may not meet
specifications.
The printhead may be
dirty.
See the information for the
image capture system.
Run a cleaning cycle, then
clean the rollers. See
Chapter 4.
Obtain and use a different
supply of cards. See
Appendix B.
Clean the printhead. See
Chapter 4.
If the problem persists,
contact your service
representative.
All card data is positioned
unevenly on the card. The card registration
might be incorrect. Set the position of printing.
See the e-Guide.
#
If the problem persists,
contact your service
representative.
Card is printed upside
down (the image is rotated
180 degrees). The card creation
application has rotated the
card.
The card rotation setting
might be incorrect.
See the information for the
card creation application.
Set the card rotation using
the Default Document
Properties (NT),
Properties (98), or Printing
Preferences (2000) dialog
box. See .
Table 5-1: Print quality problems
What you see Possible causes Solutions