Datacard Group ImageCard SelectTM and UltraGrafix SelectTM Printers - Manual (Page 58)

4-14
Maintaining the printer
User’s Guide for ImageCard® Select™ and UltraGrafix® Select™
Figure 4-14: Secure the printhead cartridge
7 Hold the printhead cartridge latch lever down (step 2 in Figure 4-14) and pivot the
printhead cartridge down toward the swing arm (step 3 in Figure 4-14). Release
the latch lever when the printhead cartridge is in place.
8 Clean the printhead. Move the cleaning pen back and forth along the length of the
printhead edge. (See Figure 4-9 on page 4-10.) Be sure to completely clean the
rounded edge of the printhead.
9 Close the swing arm, pressing it down until the push latch clicks into place.
10 Close the cover and then power on the printer.
11 Print a card to verify the quality of printing. You can print a sample card or a card
using your card creation application. If card quality is still inadequate, see the e-
Guide for ImageCard® Select™ and UltraGrafix® Select™ Printers.
♦
2
3
1