Datacard Group ImageCard SelectTM and UltraGrafix SelectTM Printers - Manual (Page 125)

C-9
User’s Guide for ImageCard® Select™ and UltraGrafix® Select™ Printers
3 From the Ports dialog box, select the port, such as COM1 or COM2 (Figure C-3).
Figure C-3: Ports dialog box
4 Select the Settings button to display the port settings.
If the PC has more than one serial port, make sure you view the settings for
the serial port to which the printer is attached.
Figure C-4: Settings dialog box
5 Select the following settings:
6 When the settings are correct, click OK to save settings and close the dialog box.
♦
Setting Value
Baud rate 9600
Data bits 8
Parity None
Stop bits 1
Flow control None
i